I redid the DARM bandpasses to update notches and band stops for the new lines. I also added two high frequency ones which may help with tracking squeezing.
Might still need some fine tuning of bandstops and notches.
Filter changes were saved in both safe and observe SDF for the l1oaf.

I updated the striptool on the wall, they are in order, lower frequencies are lower and viceversa.

RLP1 = 10-20 Hz
RLP2 = 20-34 Hz
RLP3 = 38-60 Hz
RLP4 = 60-100 Hz
RLP5 = 100-450 Hz
RLP6 = 500-1k Hz
RLP7 = 1k-2k Hz