jameson.rollins@LIGO.ORG - posted 20:00, Friday 15 March 2019 - last comment - 20:23, Friday 15 March 2019(47571)
SQZ guardian manager node renamed: SQZ_LOCK_LR -> SQZ_MANAGER
The SQZ guardian manager node has been renamed from "SQZ_LOCK_LR" to "SQZ_MANAGER". This is part of an effort to coordinate the SQZ guardian setup between H1 and L1.
The following was done:
- SQZ_LOCK_LR node was stopped and disabled
- SQZ_LOCK_LR.py module was renamed to SQZ_MANAGER.py
- SQZ_MANAGER node was enabled and started
- ISC_LOCK and ALIGN_IFO guardians were updated to reference the correct node name
- the ISC_LOCK, ALIGN_IFO, and IFO nodes (all of which reference the SQZ manager node in their NodeManagers) were all restarted to to recapture the new node
- various guardian MEDM overview screens were updated with the new node name
Everything appears to be functioning nominally now (a full lock acquisition cycle happened, going back to NOMINAL_LOW_NOISE with squeezing).
DAQ was restarted to sync to the new H1EDCU_GRD.ini file. This captured todays changes and last Tuesday's SQZ node removals. EDCU is now green again.