when the models on h1lsc0 were restarted this morning at 16:25UTC, the CW hardware injection excitations stopped on h1calinj. We restarted the h1calinj model at 23:35UTC, this did not change anything.

I have restarted the psinject process on h1hwinj1 as user hinj. I'm contacting the injection team to verify this is the correct way to do this manually (we (cds) still need to get this automated).Here is the text from the startup:

[hinj@h1hwinj1 ~]$ /home/hinj/Details/bin/x_start_psinject david.barker "start after lsc restart stopped injections"
Entered psinject_common.tcl
Sourcing /ligo/cdscfg/stdenv.tcl
Sourced stdenv.tcl
Sourcing /home/hinj/Details/psinject_config.tcl
Entering psinject_config.tcl
Sourcing /ligo/cdscfg/stdenv.tcl
Sourced stdenv.tcl
Sourced psinject_config.tcl
Note: H1 psinject WAS running as process 21196, but has died
Starting H1 injection into H1:CAL-INJ_CW_EXC using RELEASE -> preO3_H1
Injection will start at t=1237074185 (60 seconds from now)...
Injection starting now