After Apollo finished with cleanroom mods and Kyle cycled the gate valves, I entered BSC1 for First Contact removal.  The FC sheets came off the faces of the optics (HR of ITM and AR of CP) with no problems.  I observed what we have come to accept as the standard amount of FC splatter/streaks after removal (~6 per face of various sizes).  I cleaned these spots up with acetone and optics wipes and resuspended both chains.  Awaiting a round of quick TFs to check for rubbing before remounting the door.  I also did a quick sweep of the chamber and removed the remainder of our tools/parts/covers.