TITLE: 05/04 Eve Shift: 23:00-07:00 UTC (16:00-00:00 PST), all times posted in UTC STATE of H1: Earthquake INCOMING OPERATOR: Corey SHIFT SUMMARY: Keita came in and fixed the issue with the ALS Y arm. Finished initial alignment. Had to find IR by hand. Had to turn on squeezer noise eater. Made it to observing. Just lost lock from an earthquake in Canada. LOG: 23:03 UTC Changed observatory mode to corrective maintenance 23:05 UTC Jeff J. back from biking down X arm Keita fixed ALS Y arm. 02:42 UTC Keita left. Set observatory mode to initial alignment. Starting initial alignment. Cleared excitations on ITMY: patrick.thomas@zotws7:~$ diag -l -c supported capabilities: testing testpoints awg diag> awg clear 30 * reset succeeded diag> awg clear 30 * reset succeeded diag> quit EXIT KERNEL The excitation bit went away but there are still two test points open. Not sure how to clear them. 03:21 UTC Green WFS offloaded 03:49 UTC Initial alignment done 03:55 UTC IR not found While changing DIFF offset to find IR, got quick flash, and guardian immediately went on. Not sure if I really found it. Lost lock engaging DRMI ASC. POPAIR_B_RF18_I fell off. Lock loss engaging DRM_ASC again. POPAIR_B_RF18_I fell off again. Going back to check IR 04:29 UTC Found IR by hand Squeezer guardian is giving 'TTFSS EOM noisy' squeezer notifications. Jenne had me turn of squeezer noise eater. Accepted SDF differences for this. 05:20 UTC Observing 06:42 UTC Ran "z step H1:ASC-AS_A_RF36_SEG1_PHASE_R +1,40 H1:ASC-AS_A_RF36_SEG2_PHASE_R +1,40 H1:ASC-AS_A_RF36_SEG3_PHASE_R +1,40 H1:ASC-AS_A_RF36_SEG4_PHASE_R +1,40 -s 1" per Jenne's alog. Took us out of observing. 06:44 UTC Observing 06:53 UTC Earthquake arriving from Canada. Switched SEI_CONF to EARTH_QUAKE. Hope it isn't too late. 06:58 UTC Lockloss
To clear a model's testpoints (using this case as an example)
diag> tp clear 30 *