4:43:  H1 back to OBSERVING!! (joining L1 & V1 who were in Stand Down from a couple of GRBs)

Very tough first 1/2 of the shift.  COMM Gain increase might have made locking tough at the beginning.  So, attempted to touch up RefCav alignment via picomotors (see earlier alog).

After my paltry RefCav improvement, attempted locking.  Something still not quire right.  Alignment looks decent from earlier INITIAL ALIGNMENT, but ASC drives someone off around OFFLOAD_DRMI, so need to be quick to correct it (I chose SRM yaw)!

Then moved all the way through Locking states up until the Squeezer (for this, since I'm clueless about the Squeezer, I called Georgia & we walked through it).  See her alog for specifics.  Once squeezer was locked, had a few SDFs to take care of (see below).  Also needed to raise the FSS COMM Gain from 25.0 to 26.5 to get rid of the DARM high freq noise "tail".

Notes:

• Had SDF diff for TMSx's pit/yaw alignment sliders....ACCEPTED them.
• FSS RefCav  transmission/alignment issue yielded the known issue with the high freq (2kHz & up) "tail" above reference.  Walked COMM Gain from 25 to 26dB and saw nothing.  Then went from 26.0 to 26.5dB and then this brought it down.  ACCEPTING this value we have to live with until we can improve the RefCav transimission.
• [NOW I'm going to really get lunch now!!  REALLY!  Ha.]