david.barker@LIGO.ORG - posted 15:54, Tuesday 04 June 2019 (49656)
HEPI Pump Controller SDF is now monitoring the complete set of EX set points
Dave, Hugh:
The h1hpipumpctrlsdf_monitor.req file I put together this morning was not complete. Hugh and I have extended it to include all the detailed PID settings. I then restarted h1hpipumpctrlsdf and ACCEPT+MONITOR'ed all the new channels into h1hpipumpctrlsdf_OBSERVE.snap.
Attached screen shows the complete set of channels.
Images attached to this report
