This HAM1 WFS Sled was completed & bagged/stored back in Oct/Nov by Keita. I opened it up to document a few items (optical component distance, photos, & parts used). After noting everything I needed, the Sled was wrapped back up & stored in its plastic bin under the Optics Table in the Optics Lab. It will stay here until installation. Keita will submit an a document about this Sled to the DCC separately.
Optical Component Distances
For measurements below, the lenses are measured on the "backface" of their Lens Holder. The Mirrors & Beam Splitters are measured on their glass "front faces". All measurements in mm.
Photographs
An overall photo of this Sled layout is attached to this entry. All photos of this Sled are located in ResourceSpace, here.
List Of Components Installed
DCC document is this: T1200555
According to me, L1 to L2 was measured 198.5mm, not 198mm.