[Filiberto / Kiwamu]
This afternoon we spent a couple of hours to double-check which cables are missing and which had been installed. During the work we found that some of the cables around the remote rack C2 were a bit too short to reach the electronics. All of them need to be elongated by 20 cm at least. They are :
- CAB_H1:ISC_48
- CAB_H1:ISC_27
- CAB_H1:ISC_28
We tried pulling the first cable to drag out more of its length, but it is still too short.
Filiberto will give it another shot when he climbs the cable tray for installing some new cables.