After the Initial Alignment, the outlook looked better with H1 making it all the way to DRMI on its own (no PRMI tweaks needed). But it had multiple locklosses before OFFLOAD DRMI ASC.
Did a small alignment tweak via PRMI & this got me a little further and even through a noisy stretch for the PR Gain & POP16 (see attached).
But overall, have not had much luck. The winds have steadily been increasing (steady in the 20s & approaching gusts in 40s). I am marking OBSERVATORY MODE from Locking to WINDY.
OH, and we also had some South Pacific quakes roll in, so I'm in the EARTHQUAKE state as well.
I'm going to wait out the EQ a little and then return to locking in a bit.
And now a 7.3 EQ is inbound within the hour, & Seismon recommends LARGE_EQ state. So this will prevent locking until it passes.
In the meantime, I'm returning to locking DRMI & trying to get past it with the high winds which have remainded steady over 20mph for the last 4-5hrs. (Just had another DRMI lockloss.)
And now a 7.3 EQ is inbound within the hour, & Seismon recommends LARGE_EQ state. So this will prevent locking until it passes.
In the meantime, I'm returning to locking DRMI & trying to get past it with the high winds which have remainded steady over 20mph for the last 4-5hrs. (Just had another DRMI lockloss.)