After the EQ lockloss, had the issues which were new to me:

• ALSy Video (#50630)
• Issues with transitioning between PRMI/DRMI
  • Not sure if this was just an issue with a timer, but would select states for ISC_LOCK and would not see anything happen (i.e. tried for PRMI, but would see no change and not see SRM misalign [I might have selected the wrong PRMI state], and after PRMI_ASC completed, selected another state and ISC_LOCK remained frozen on the order of minutes before trying for DRMI.
• Noticed ring up of LSC/ASC signals around DC Readout ISC_LOCK states (see attached)....but rode through this and eventually made it to NLN.

Had a few SDF diffs (see attached of screenshot before accepting) which I went through with Sheila (ACCEPTED all of them....but wondering if we'll get them again).