I tested going to observing without squeezing during the commissioning break today. The previous instructions did not work because the SQZ_MANAGER's subordinate nodes also needed their nominal states changed, and this is not obvious on the node screens. I talked to Jamie about this and filed an issue for it.

The new instructions have been updated in this wiki. There's a quick reference up top, and overly detailed instructions below. The basic idea is:

• Request SQZ_MANGER to NO_SQUEEZING

• Edit the nominal states:

  1. SQZ_MANAGER -> NO_SQUEEZING

  2. SQZ_OPO_LR -> DOWN

  3. SQZ_CLF_LR -> DOWN

  4. SQZ_LO_LR -> DOWN

• Reload the nodes

• Manual ISC_LOCK to INJECT_SQUEEZING, AUTO then back to NOMINAL_LOW_NOISE