Reports until 04:59, Wednesday 11 September 2019
H1 CDS
david.barker@LIGO.ORG - posted 04:59, Wednesday 11 September 2019 - last comment - 05:27, Wednesday 11 September 2019(51891)
EY front ends power cycled, looks like things are coming back

Corey, Dave:

Corey power cycled h1susey, h1seiey and h1iscey. This cleared the DAQ errors with EX and corner station ISC. h1susey is running, both SEI and ISC IOP models have a negative IRIG-B excursion which should clear soon. In the mean time their DAQ and IPC status is bad.

Images attached to this report
Comments related to this report
david.barker@LIGO.ORG - 05:09, Wednesday 11 September 2019 (51892)
Link

Remaining IPC errors are because h1cdsrfm is not responsive. I've taken this out of Dolphin and am remotely reseting it.

corey.gray@LIGO.ORG - 05:27, Wednesday 11 September 2019 (51893)SEI
Link

After the trip to EY, Dave said I could bring back all the tripped SUS & SEI at EY.  Started with ETMy & TMS.  Then moved on to HEPI, and then SEI ETMy.

Did notice HPI_ETMY_SC a message for this node (via SEI_CONF) which said "Configuration is not correct, re-request to recover"....there was also some a YELLOW indicator for this node.  After re-requesting CONFIG_SC_ON, this Node was good.

This made everything for EY GREEN.

Noticed YELLOW for the B3_SEI & B1_SEISEI guardian nodes.  Which showed SEI_ITMx (&y) had notifications for their ISI ITM ST2 guardian nodes for both x & y say "SETPOINT CHANGES.  see SPM DIFFS for differences".  Not sure what to do about those SPM Diffs.  But other than that, all EY SEI guardian nodes are green.