Earlier today I had noticed that the LSB sewage lift station control panel was alarming as if the tank was full (HIGH-HIGH) -> As found, the white lamp on the control panel was illuminated, the audible alarm was beeping, the switch for PUMP 1 = OFF, the switch for PUMP 2 = AUTO, and the PUMP RUNNING lamp was off -> I switched PUMP 2 to HAND and the PUMP RUNNING lamp, then, illuminated green.  I let the pump run for 3 minutes and then switched back to AUTO.  After this, the white lamp remained illuminated, the PUMP RUNNING lamp went off and the audible alarm stopped.  Later, I repeated the AUTO->HAND->AUTO switch cycle exercise only this time the PUMP RUNNING lamp remained on while left in AUTO.  After several minutes, I de-energized the panel via the main local ON/OFF switch.  I had discussed the issue earlier with Bubba. 

As is now, the lift station pump(s) will remain off (i.e. the tank won't empty) until Bubba et. al. come in on Monday. 

1752 hrs. local -> Leaving site now.