Before a lockloss (9:29utc/ 2:29amPDT), noticed "BRSx is noisy" on Diag Main.
Then H1 broke lock.
Followed by EX ISI trip & TMSx trip.
BRSx is waivering between DAMPING & "BRS Bad" for the Damping Control Monitor. Will investigate more after I try to restore EX ISI & TMS.
9:51 Took OBSERVATORY MODE to CORRECTIVE MAINTENANCE since this is an out-of-the-norm lockloss & BRSx looks to be in a BAD state.
Follow-up on BRSx:
Not sure why BRSx is in a BAD state, but back in August we had bugs attacking it and this was causing glitching. These issues led Jim & TJ to make a diagnostic to flag BRS system when it has issues (this is notified me there was something wrong with the BRSx).
On the BRSx Overview we have "BAD" State showing along with a red box around BRS ETMX Velocity. Since we have issues with BRSx, will run H1's SEI_CONF in the WINDY_NOBRSX state until this can be addressed during the day by Jim/Hugh. Here are some attachments with info on BRSx:
Notes on EX SEI:
After the lockloss and the Watchdog trips, the ISI would trip immediately after untripping and letting Guardian attempt to take the ISI to FULLY ISOLATED. So I used instructions Jim gave me when I had similar issues recently. Basically, I worked with individual SEI guardian nodes first:
Summary pages are down and my remote connection is hopeless, but Corey's image shows BRSX clearly going out of range on his screenshot of the BRS overview (the lower right drift trace shows smooth curves alternated with discontinuous flat sections, doesn't look like real motion). When I checked driftmons before the weekend, BRSX still hand 4-5000 count margin. I suspect that VEA temps have driven it out of range, as a reaction to the cold over the weekend.