Bubba G., Corey G., Kyle R., Tyler G.

Installed HAM6 North door. 

Kyle R., Tyler G.

Installed HAM6 RGA (East Door, leftmost port)

Kyle

Rough pumped HAM6 to ~0.4 torr then switched over to turbo pump.  Roughed at vent valve using turbo backing cart with dedicated "clean" maglev turbo backing flex hoses before moving cart and hoses over to back maglev turbo.  These flex lines are only used to rough at the vent port or back HAM1/6 maglev turbos, i.e., are never used to vent.