Reports until 14:51, Tuesday 12 November 2019
H1 General
camilla.compton@LIGO.ORG - posted 14:51, Tuesday 12 November 2019 - last comment - 16:19, Tuesday 12 November 2019(53185)
Re-locking after Maintenance

Camilla Patrick Sheila

1h 50 for locking
Currently  completing  Coil driver tests before we go back into Observing 
 
20:11 LVEA empty
20:13 SEI config back to WINDY
20:14 Green arms locked
20:24 DOWN at ENGAGE_DRMI_ASC (bad SRM alignment?)
20:35 AQUIRE_PRMI
20:39 DOWN. Have requested DRMI_LOCKED_PREP_ASC (when MICH and SRC1 come on, seem to have problems) 
20:45 Sheila adjusted gains ..? (These didn't help so were reverted)
20:47 DOWN at ENGAGE_DRMI_ASC Decided we have done 20 minutes of DRMI so will go to Initial Alignment
20:52 Initial Alignment 
21:04 Stuck on Xarm (ALS_XARM = FAIL unknown why)
21:14 Restarting Initial Alignment
21:30 Initial Alignment Complete 
21:32 Locking Attempt 4
22:00 For Jenne's test, stopped at LOWNOISE_ASC, and manually skipped over LOWNOISE_COIL_DRIVERS
22:03 NLN  (yay!)
22:16 NLN_CAL_MEAS (for test)
TESTS ...
 
SDF's accepted (see attached images) as Sudarshan changed the PCAL Model
Comments related to this report
camilla.compton@LIGO.ORG - 14:53, Tuesday 12 November 2019 (53200)

SDFs accepted

Images attached to this comment
camilla.compton@LIGO.ORG - 15:01, Tuesday 12 November 2019 (53201)

22:58 OBSERVING (tests finished)

camilla.compton@LIGO.ORG - 16:19, Tuesday 12 November 2019 (53206)
23:29 Lost Lock.
23:38 Had to change the TR_X and TR_Y offsets in TR COMM. Sheila noticed offsets were visible on NUC2 during FIND_IR