Attached are the TRAMP changes I accepted in SDF yesterday. Before accepting these, I ran a matlab script to look for the values 7 days prior and 14 days prior, and when those agreed with the current values, I then accepted them in SDF. These include TRAMP SEI values for ITMX, ITMY, BS, HAM1, HAM2, HAM3, HAM4, HAM5, and HAM6. Attached screenshots show most, but not all SEI HEPI and ISI TRAMP values that were restored. The overall list is:
- ITMX/Y BSC ISI ST1/ST2 DAMP
- ITMX/Y BSC ISI ST1/ST2 ISO
- HAM ISI DAMP
- HAM ISI ISO
- ITMX/Y BSC HPI IPS
- ITMX/Y BSC HPI ISO
- HAM HPI IPS
- HAM HPI ISO
These are a result of an unusual event, at an inopertune time, and now, experienced gained.
All of these chambers (unless I've missed something) had their safe.snap-s selected when these screenshots were taken, not their OBSERVE.snap-s, that's why these SDF diffs came up. Unsure if this will affect the chambers next time they are restarted, certainly having the BSC st1 l4c feedforward outputs turned on when the model is restarted isn't ideal. There maybe other issues.