I did a quick look at the DetChar pages to see if I could get a sense for the utility of the new wind fences. We do not have the free-stream anemometer running again at EndX, so for now I'm just using the roof-top PEM anemometers to get a qualitative sense.

The 'flip-book' style set of pages below shows that the fences work pretty well.

Before the fence, when the wind is blowing, the histograms of the roof-top sensors are all about the same.

After the fence, the wind speeds at the two ends are clearly lower that the speed at the corner station. By eye, the wind speed is not quite a factor of 2 smaller, but close. The slab tilts at the end are much smaller. (flip between pages 4 and 5). There is a lot to see in these plots, and hopefully they can be used to ask interesting questions that a REAL study can try to answer.

These are also in the DCC at G2000122.