WP8563 add four 256Hz DAQ channels

Rick, Camilla, Dave:

I have hand edited H1PSLFSS.ini to uncomment and set datarate=256 for the following four channels:

H1:PSL-FSS_FAST_RAMP_INJECTION_IN1_DQ

H1:PSL-FSS_NPRO_TEMP_IN1_DQ

H1:PSL-FSS_NPRO_TEMP_OUT_DQ

H1:PSL-FSS_TEMP_SEARCH_LOOP_IN1_DQ

This is purely a DAQ reconfiguration with no associated model change, allowing us to load the new configuration into h1pslfss by just pressing the 'DAQ LOAD' button on the GDS_TP medm, and then restarting the DAQ.

If all goes well we will not need to restart the h1pslfss model, however if it becomes necessary to do this it is important that we do not compile or install h1pslfss because model changes have been made which we do not want to be installing at this time.