In the famous words of a Mr. Kissel: "BOOM!"

Today's installation of PRM went extremely smoothly, as if we've had practice at this.  No issues with any hardware or the placement of the suspension using the install arm and cookie cutter template.  PRM is on it's spacer and all dog clamps are securely holding it to the ISI table.

Filiberto is going to finish running the external PRM/PR3 cables from the D3 port to the satelite boxes and we'll start plugging in the suspensions in the afternoon.

Pictures can be found on ResourceSpace near the one attached.

https://ligoimages.mit.edu/?c=1280