A long time ago I started a screen to make handling all of the SEI guardians and watchdogs easier. It can be found by going to SEI-> ISI SENSCOR CONFIG, then clicking the SEI WD SCREEN, in the upper left. It was pretty barebones, with just the medium chamber guardian overviews, buttons to reset watchdogs and lights for the ISI and HEPI watchdogs. I've been meaning to add more detail, to make it easier to see what seismometers and actuators were doing. The idea being to make it easier to see what all of the platforms are doing. Finally got around to that this week, my current version is attached below.

For each of the guardians, the relevant seismometers (St1 T240, St2 GS13s for BSCs, GS13s for the HAMs) are to the left, the actuator outputs are to the right. I imagine the layout looks a lot confusing, so I'm open to suggestions on better organization.