camilla.compton@LIGO.ORG - posted 11:30, Monday 25 October 2021 - last comment - 09:47, Tuesday 26 October 2021(60381)
ZM6 Baffle installed
Mitchell and I installed the baffle on ZM6.
I had to move the tall table Cable bracket one bolt hole to the left (tagging SEI ) photo.
The SQZ team should check the beams goes though the baffles and adjust as necessary by loosening each set of the nuts shown in photo. It can then be adjusted and nuts tightened. (tagging SQZ)
Images attached to this report
Comments related to this report
Baffle position was adjusted on Tuesday when the OPO beam was going from zm5 to zm6 to OFI to SRM.