WP 3803

We powered up the SEI BSC3 IO Chassis for the first time this afternoon. DC power, Timing and One Stop cables were attached.

I created a h1iopseib3 model (copy of h1iopseib2) and we ran this model after verifying the correct number of ADC, DAC and BIO cards were being seen. The system as added to the Dolphin master's configuration.

I have added h1iopseib3 to the CDS Overview MEDM screen. The raw ADC counts MEDM screens can now be used by Ben, Richard and Filiburto for tomorrow's rack checkout work.

I'll keep this workpermit open until this system has been connected to: the DAQ; the alarm system; burt safe.snap; and its IOP SUS Watchdog function has been tested.