Georgia last adjusted ETMY HWS in alog 58767. I turned on the laser laser week (alog#61580) and could see a small amount of light (photo).
Today I streamed the image and adjusted picos as noted below to improve the amount of light on the CCD camera (photo).
When I misaligned TMSY the light disappears, I could also make it disappear by mis-aligning ETMY by ~50urad so this beam is coming from in vaccum. It didn't look clean or central enough to try to take a ring heater test so later in the week I'll open up the EY table and realign by hand.
(X,Y) before | (X,Y) after | |
Pico #5 (HWS M2) | 170, -90 | 50, 350 |
Pico #6 (HWS M1A) | 1250, -1510 | 1000, -1500 |
The labels on the pico screen are incorrect- it suggests #7 and #8 are HWS M1A, M2.