For ZM6 we noticed that there was no (Zero on medm screen) DAQ output in Damped/Robust Damped state, however when you move the suspension to ALIGNED state then you get a normal DAQ output. We are investigating this issue as well.
jeffrey.kissel@LIGO.ORG - 09:02, Wednesday 23 February 2022 (61851)FRS, ISC, SUS
Fil, TJ, Rahul
For ZM6 we noticed that there was no (Zero on medm screen) DAQ output in Damped/Robust Damped state, however when you move the suspension to ALIGNED state then you get a normal DAQ output. We are investigating this issue as well.