[Jenne, Sheila, Georgia, Craig]
The IFO was powered up on RF so we could perform OMC scans. The template for the scan is located in userapps omc/h1/templates/OMC_scan_50W.xml
80 second scan duration
Scan | GPS Time | Darm offset (DARM1_offset) | Input Power (W) | Circ Power (kW, X arm) | RF 9 mod depth (dBm) | RF 45 mod depth (dBm) |
1 plot | 1341004914 | 0 | 10 | 51 | 23.4 | 18 |
2 plot | 1341008429 | 1e-5 | 10 | 51 | 23.4 | 18 |
3 plot | 1341009831 | 0 | 50 | 233 | 20.4 | 18 |
4, attempted | lockloss | 0 | 50 | 233 | 20.4 | 15 |
Scan 4 did not complete- lost lock at 22:53 UTC. Likely due to 3 dB reduction of RF45 modulation depth (lock held for two minutes after reduction).
Just a note that I killed the lock when trying to go from DC readout at high power to RF readout. I had matched the gains via the input matrix, but we lost lock during the ramp between them. Next lock Georgia figured things out so that we were on RF DARM.