Last night I removed the HWS X plate and today I pico-ed to try and move the beam away from any clipping. I'm not sure this helped. The plate is now on again and code is running.
Pico-motor | Starting values | Ending values |
#1 | (-200, 100) | (-500, 100) |
#2 | (0, -204) | (-200, 96) |
#3 | (7547, 2467) | (7552, 1419) |
#4 | (-5086, 4265) | (-3380, 4065) |
We'll need to take new references at a time when the IFO is cool and look at swapping the CCD filter which is dusty. Starting and ending images attached.