The Apollo crew and I spent some time sorting Install Tooling (HAM Arm, BSC Arm, 5-Axis Table) so that it could be palletized and stored in a reasonable location. A storage location was picked out: along the south side of the HAM 10-11-12 run. The tooling was not moved to the storage location today due to work on the main crane.

I moved all remaining items from the SEI Test Stand cleanroom to the SUS Test Stand cleanroom. I'll have the cleaning crew start the cleaning process ASAP.

The Staging cleanrooms closest to HAM2 continue to have high dust counts. I confirmed the function of the iLIGO particle counter with a recently calibrated aLIGO particle counter. I made sure parts/tools were covered and then confirmed that both cleanrooms were plugged in. I will pursue this some more tomorrow. We were planning on a retrofit for the green cleanroom anyway so we may just take care of it now.