I have changed the DC biases on M1s of MC2 and MC3 yesterday for getting a good alignment of the IMC.
Since the IMC was needed to be locked for a short period I just tweaked the two suspensions as this is relatively easy and quick to get a good alignment.
Here are the suspension biases on M1 of MC2 and MC3 before and after my adjustment:
/**** BEFORE (PAST VALUES) *****************************************/
H1:SUS-MC2_M1_OPTICALIGN_Y_OFFSET = 239
H1:SUS-MC2_M1_OPTICALIGN_P_OFFSET = 407
H1:SUS-MC3_M1_OPTICALIGN_Y_OFFSET = -1024
H1:SUS-MC3_M1_OPTICALIGN_P_OFFSET = 287
/**** AFTER (CURRENT VALUES) *****************************************/
H1:SUS-MC2_M1_OPTICALIGN_Y_OFFSET = 240
H1:SUS-MC2_M1_OPTICALIGN_P_OFFSET = 447
H1:SUS-MC3_M1_OPTICALIGN_Y_OFFSET = -1006
H1:SUS-MC3_M1_OPTICALIGN_P_OFFSET = 224