Installed a replacement HEPI pump controller at EY to replace the unit which no longer boots.  This controller is connected to the slow controls network as h1hpipumpctrley.

The pump controller has an epics database customized for EY.  To start the IOC, log in as controls, cd to ~controls/target-ey, then as root execute the ./run command.  

The SITEMAP.adl was modified to have a "Pump Controller" entry in the LVEA and EY HEPI menus.  

Note that the pump controller at EY is not actually controlling anything, it is just monitoring pressure.  Also, the pressure sensor needs to be connected to the correct input.