Replaced IP12's non-working MultiVac ion pump controller with a DualVac controller yesterday and modified signal cabling pinouts to match.  Pumped X-end with MTP for awhile then switched over to IP12 (note IP12 status is still "RED" in CDS displays -> Dave B. will correct database parameters to match new controller's signal outputs before the next reboot at which point IP12 status will change to "GREEN" in CDS displays)

Spun down MTP at X-end and shut down QDP80 pump.  

Noticed IP6's high voltage output "FIXED" at 7000V -> Corrected to "STEP" output.