Reports until 07:46, Wednesday 22 May 2013
H1 IOO
keita.kawabe@LIGO.ORG - posted 07:46, Wednesday 22 May 2013 - last comment - 17:02, Wednesday 22 May 2013(6460)
HAM2 pico cable missing

MC2 transmission QPD (HAM3) was centered using picomotors.

Couldn't center IM4 (HAM2) transmission, picomotors didn't move. Turns out that the cable was not routed from the chamber to IOT2L. Right now a seemingly  incorrect cable (SUS something something) is connected to the pico feedthrough (D4-3C2).

Comments related to this report
keita.kawabe@LIGO.ORG - 17:02, Wednesday 22 May 2013 (6472)
Link

After the correct cable was connected in the morning, I was able to move IM4 trans picos to center the beam.