The seismic BS front end h1seib2 crashed after it was "daq reloaded" (following a hand edit of its DAQ INI file). This caused most of the corner station front end models to be marked as 0xbad by the DAQ. I did the following
At this point all the front end models went into good 0x0 DAQ status.
After power was restored, the h1iopseib2 model did not autostart, I restarted it by manually pressing the BURT button on the GDS_TP medm at the appropriate time. I was then able to start the models h1isibs and h1hpibs.
At this point the following models were reporting INI changes: h1isiitmy, h1isibs and h1isietmy with a DAQ status of 0x2000. I restarted the DAQ and all is now good.