[Mark B. Arnaud P.]

In the same manner as the previous changes on BSFM/QUADS, the calibration gain and sliders range of the TMSY have been modified for TMSY

Details :

In order to change the sliders range, the following adl file has been modified : SUS_CUST_TMTS_M1_OPTICALIGN.adl located in /opt/rtcds/userapps/release/sus/common/medm/tmts

It has been commited to the svn and a safe_snap file will be saved when isc team will allow it.

The calculation of the gains and offsets is detailed in TMSY_calibration.m located in /ligo/svncommon/SusSVN/sus/trunkTMTS/Common/MatlabTools and the 2nd picture, from Mark B.'s mathematica model has been used as a reference for M1 to M2 compliance in Pitch and Yaw (rad/N.m)