We have started the campaign to set the Settings Definition Files (SDF) for the OBSERVE state of H1. LSC and ASC had many changes which I have looked through and then Accepted in SDF for the current Lock stretch (after some consult with TJ and Elenna). (Hitting Accept in SDF sets the current Epics channel value to be the new Set point value for future reference.) None of the LSC channels listed for the current lock are ones that are adjusted during lock stretch by Guardian. Some of these channels may change between lock stretches so will watch for these at next Observing stretches to see what is dynamic and then decide to unmonitor, etc.
In the very unlikely chance that someone needs to reset one of the settings from today based on this interface, attached are the snapshots of what was loaded from some older setpoint.
BOS had over 1800 channels so no snapshot taken (which woulnd't be useful anyways).
LSD SDF old data/pictures prior to Accepting new Set points just now.
ASC SDF old data/pictures prior to Accepting new Set points just now.
ISCEY, ISCEX, EX_ISC, and EY_ISC SDF files prior to setting new setpoint for the current lock stretch just now. Mostly dark offsets and a new filter commissioned for the first 2. Some settings which we'll watch for changes on in the second 2 snapshots.