Betsy, TJ, Rahul
I have accepted or unmonitored a bunch of settings on SUS SDF for the OBSERVE STATE. I trended all the settings difference and accepted everything which didn't change in the last few months. I have also set the offsets (for COILOUTF) to zero for all the QUADs and R0 chain after going through all of them. There were a few things which were changed by the GRD, hence I have either accepted them or unmonitored (things like TRAMP) them.
Attached below are the screenshot of all the SDF which original existed when I started yesterday morning. Hence if changes were accepted by mistake then please compare it with the screenshot and make the necessary changes.
Still there are a few SUS SDF remaining and we are planning to tackle this today (currently ongoing).
All of the remaining SUS observe.snap SDFs are now cleared. I checked the remaining and tracked them down to either exsisting in the safe.snap at the accepted value, or coded into the guardian at that value.
