Locking Went well.
Violin mode ITMY Mode8 was ringing up and I turning off damping for it at 1:15 UTC
Seems to have stopped the mode from ringing up.
Lockloss:
Lockloss from unknown cause at 1:40 UTC:
https://ldas-jobs.ligo-wa.caltech.edu/~lockloss/index.cgi?event=1367717996
Relocking:
ISC_LOCK Guardian went into and through AQUIRE_PRMI without any intervention and the IFO locked at NOMINAL_LOWNOISE at 2:57 UTC.
The IFO is almost thermalizing and, once it's circulating arm powers settle I'll start a calibration measurement.
I have attached a picture of the SDF that I have accepted into SDF so i can get back to Observe mode.
CAL_AWG_LINES : ERROR while trying to get to NLN_CAL_MEAS
Reloaded CAL_AWG_LINES Guardian and the problem was resolved.
Picomotor controllers should always be off in observe, i.e. PICO_x_CURRENT_ENABLE should be set to disabled.
I disabled the picomotor that was left on (sitemap > LSC > Picomotors > SQZT 0 > Disabled) and accepted in SAFE sdf. Tagging CAL for the sdf diffs in main alog.