[Jenne, Anamaria]

Anamaria ran an initial alignment this afternoon, but noted that OM1 wasn't getting cleared after the Input_Align step. I had thought I fixed this a few weeks ago, but we should go back and double check that it gets cleared so that we can finish initial alignment automatically.

Also, I trended the ITM green camera error signals, and it looks like they've been drifting away from 0 throughout the day (which is why initial alignment was needed).  They are uncontrolled except for initial alignment, but they should still usually be roughly stationary.  I assume it's the heat, but all of the VEA temperatures on the control room screenshots look fine at first glance.  Anyhow, maybe things are all fine, and it was just time for an alignment, but noting in case it's helpful to look at Monday morning.