Displaying report 1-1 of 1.
Reports until 13:51, Tuesday 16 May 2023
H1 ISC
marc.pirello@LIGO.ORG - posted 13:51, Tuesday 16 May 2023 - last comment - 15:51, Tuesday 16 May 2023(69652)
ISC Rack Power Adjustment

R. McCarthy, F. Clara, F. Mera, M. Pirello

Per WP11193

1 - Added a +/-24V tap to the ISC-C4 junction box

2 - Moved the +/-24V sequencer cable from ISC-C3 to the new tap in ISC-C4

3 & 4 - Adjusted mezanine rack cabling to accomodate the new configuration in the CER racks.

5 - Moved the Beckhoff +24V rail cable from ISC-C2 LHS to ISC-C3 RHS, this supply is now "ISC-C2-SC1 +24V"

6 - Moved the Beckhoff +24V rail cable from ISC-C2 RHS to ISC-C2 LHS, this supply handles "ISC-C2-SC2 +24V"

The remaining supply on the ISC-C1 is now "ISC-C1-IO LSC&ASC +24V"

We ran into a Beckhoff issue and had to replace an EK1011 terminal in Ethercat Corner 2 to bring beckhoff back online.

We did not finish the 7th & 8th task of the work permit, which is to isolate the OMC-IO from the SQZ Beckhoff, and replace H1-ISC-C1&C2 -18V RHS swith new supply.  We will do this next Tuesday or sooner if environment allows.

Comments related to this report
jeffrey.kissel@LIGO.ORG - 15:51, Tuesday 16 May 2023 (69665)CDS, DetChar, ISC, SQZ
See LHO:69633 for further information on this work (both steps that were completed and those which were not).
Displaying report 1-1 of 1.