Thursday, 11 July 2013 Gerardo Moreno, Scott Shankle, Mike Vargas, Nichole Washington Weldments and Cylinder were unwrapped and brought into the cleanroom with the help of Apollo. Weldments were assembled to Cylinder. Assembly was difficult because the holes are to small, no room for adjustment of parts. Hole diameter on Weldments and Cylinder is 0.209". Screw diameter is 0.190". All 35 locations were mated. Holes should be reamed out for future assemblies. pics 1 and 2 - teamwork pic 3 - buttoning up pic 4 - end of the day Time spent on actual assembly for the day was ~4 hours.