Gerardo Moreno, Scott Shankle and Mike Vargas Attached the Face Plates. One screw on the Right Face Plate could not be attached (pic 2); hole does not line up. One screw on the Left Face Plate could not be attached (pic 1); holes do not line up. Attached the Balance Weights and the Tongue Depressors released very nicely (pics 3 and 4). The baffle was balanced using a Plumb Bob (pic 5). The height needs to be checked. The Assembly Fixture and Crane will be needed if height needs to be changed. Observations - the Face Plates are very flimsy and rattle a lot. They are tied to the baffle on the outer circumference only.