kiwamu.izumi@LIGO.ORG - posted 18:00, Tuesday 16 July 2013 - last comment - 20:43, Tuesday 16 July 2013(7105)
PSL down
The PSL got down at around 5:50 PM in PDT due to errors in the diode and crystal chillers according to the status medm screen.
[Sheila, Kiwamu]
We went in the PSL enclosure and turned it on by following the latest procedure, T1200259-v3. There was no problem for turning it on and it runs fine so far.
By the way the PSL was in the science mode when we were going in. We followed a procedure which is recently being established by Robert to switch the mode to commissioning. Also at the end of the work we switched it to the science mode again by following another procedure which is also being summarized by Robert. So the PSL is now back to the science mode.