Mark Barton, Gerardo Moreno, Arnaud Pele, Scott Shankle, Mike Vargas, Thomas Vo

Magnets were added to the plates.
B&K Testing performed; results are being reviewed.
Purchased ~20 18-8 SSTL 1/3-13 x 1.25" and 1.5" Flat Head Cap Screws (Made in USA) locally. Additional were Made in INDIA, but will not be used. Screws will be cut to size and Class A cleaned tomorrow.

Alignment Tooling and Baffle/Ring Spacer Bar have been Class B cleaned.
Forceps need to be shaved and re-cleaned.

We will begin working Arm Cavity Baffle for BSC9 and return to Manifold Cryopump baffle for ETMx on Tuesday (7/23)