The DAC buttons on the SUS_CUST_QUAD_OVERVIEW.adl screen have been semi-broken for some time. They did link to automatically generated DAC monitor screens but typically the wrong ones - always DAC0 or DAC1, even though there are up to five different cards.
Therefore I created a master SUS_CUST_QUAD_DAC_MONITOR.adl screen that would show all channels for all levels of a quad, in both the user and IOP numberings.
To facilitate this, I added new macros to the sus*_overview_macro.txt files for *=itmx/itmy/etmx/etmy/quadtst as follows:
(While I was at it, I corrected an error I discovered in the file for ITMX: UPUL/UPLL/UPUR/UPLR had been 2_* but should have been 3_*.)
I linked the new screen to all the DAC buttons on SUS_CUST_QUAD_OVERVIEW.adl and SUS_CUST_QUAD_R0.adl. Since the ESD channels were now referenceable, I put them on the SUS_CUST_QUAD_OVERVIEW.adl as well.
The new screens are committed - LLO should svn up /opt/rtcds/userapps/trunk/sus/common/medm.