Model restarts have changed some of the values for PCAL subsystem listed in the attached screenshots.
Jeff and I trended back the channels and reverted what is shown below.
That happened to be the right thing to do.
All of the values match what we have in the PCAL_LHO_CAPUTfile_O4run which is the file that containes the desired values for the O4 run:
https://svn.ligo.caltech.edu/svn/aligocalibration/trunk/Projects/PhotonCalibrator/O4_EPICS_calibration/Pcal_LHO_CAPUTfile_O4run_2023-05-11.txt
The following channels were changed back to values appropriate for the X/Y Comparison.
H1:CAL-PCALY_PCALOSC4_OSC_FREQ = 284.01
H1:CAL-PCALY_PCALOSC4_OSC_SINGAIN = 1430.0
The was a change to H1:CAL-PCALY_PCALOSC4_OSC_TRAMP from 5 sec to 10 seconds which should just be a more gentle ramp up.
All is well for PCAL epic channels.