This is the last step of the alignment that is done with laser beam outside of the chamber. Once in chamber, we'll have to fine tune it using the real ALS beam.

Tomorrow we will:

1. Install beam diverter cable (all other cables were already installed).
2. Roughly balance the tele/table using a balancing bridge.
3. Weigh the tele/table/cable. We will move the thing from the work table to a big scale (we have this in the EX lab) using a Genie (we have this in the EX VEA but we need to talk with SUS people).
4. Mate tele/table to the suspension under Bosch frame.