I noticed earlier this week that two vacuum guage pressures had been temporarily removed from the alarm system in Sep 2022 during a BSC2/HAM6 vent. I have added them back into the alarm configuration and restarted the service.

+<!-- WP10675 remove for vent
 <Channel name="H0:VAC-LY_Y1_PT120B_PRESS_TORR" low="1.0e-10" high="2.0e-06" description="VE gauge, PT120B BSC2 CC">
 

+<!-- WP10675 07Sep2022. Temporarily remove HAM6 Alarms for the duration of the vent.
 <Channel name="H0:VAC-LX_Y0_PT110_MOD1_PRESS_TORR" low="1.0e-10" high="5.0e-06" description="HAM6 VAC">