TITLE: 11/25 Eve Shift: 00:00-08:00 UTC (16:00-00:00 PST), all times posted in UTC
STATE of H1: Observing at 155Mpc
OUTGOING OPERATOR: Austin
CURRENT ENVIRONMENT:
SEI_ENV state: CALM
Wind: 11mph Gusts, 9mph 5min avg
Primary useism: 0.07 μm/s
Secondary useism: 0.36 μm/s
QUICK SUMMARY:
Observing and Locked for over 10hours now, everything looking good. Will keep a close eye on violin modes.
SEI_CONF is still in USEISM due to high microseism, and the SEI_ENV is CALM instead of WINDY.
As previously noted (74392), the control room hasn't been getting readings from the PSL 102 (anteroom) DustMon for dust counts, temperature, or humidity. This started around 19:30UTC on 11/21/23(ndscope), which would have been during the time that Jason and Ryan S were in the PSL enclosure. I had asked Ryan S to do the PSL Dust Monitor FAMIS check for me if there was time after the ReflCav adjustment. I am not sure if he ended up having time to test the dust monitor then, but if so, something might have gotten messed up while/after the check that may explain the readback issues.
Ryan S had not tested the dust monitors in the PSL so DustMon 102 not getting new dust/temp/humidity readings due to some other issue.