TITLE: 12/28 Day Shift: 16:00-00:00 UTC (08:00-16:00 PST), all times posted in UTC
STATE of H1: Microseism
CURRENT ENVIRONMENT:
SEI_ENV state: CALM
Wind: 4mph Gusts, 2mph 5min avg
Primary useism: 0.13 μm/s
Secondary useism: 0.99 μm/s
QUICK SUMMARY:
The Primary and Secondardy MicroSeism's are Elevated, and honestly not living up to their micro prefix much at all. Tagging SEI.
Locking attempts today:
16:05:11Z LOCKING_ALS -> LOCKLOSS
16:07:17Z LOCKING_ALS -> LOCKLOSS
started an Initial_Alignment
16:44:03Z LOCKING_ALS -> LOCKLOSS
17:04:59Z PREP_DC_READOUT_TRANSITION -> LOCKLOSS
17:07:10Z LOCKING_ALS -> LOCKLOSS
17:09:15Z LOCKING_ALS -> LOCKLOSS
17:13:04Z LOCKING_ALS -> LOCKLOSS
17:15:47Z LOCKING_ALS -> LOCKLOSS
17:22:16Z LOCKING_ALS -> LOCKLOSS
Dave got onto TeamSpeak to ask me to restart the H2 Thermostats.
Paused the IFO in Check_Violins to damp at 2 Watts before trying to move up.
18:06:30Z CHECK_VIOLINS_BEFORE_POWERUP -> LOCKLOSS
18:21:22Z DRMI_LOCKED_CHECK_ASC -> LOCKLOSS
18:25:05Z LOCKING_ALS -> LOCKLOSS
Paused the IFO in Check_Violins to damp at 2 Watts before trying to move up. (note: The 60W settings for ITMY modes 1-4 work well in 2W)
19:53:48Z TRANSITION_FROM_ETMX -> LOCKLOSS
19:57:36Z LOCKING_ALS -> LOCKLOSS
Dave suggested that I restart NUC5 the Seismic Nuc, to see if DMT veiwer would work today.
And I got a new NUC5 error " Leap second data is expired. " and I can no longer run NDSCOPE on nuc5.
I have copied the file path for the ndscope that shows me ground motion, and I can run it on my workstation but ndscope nolonger works on NUC5 at all. Tagging CDS.
